Fume Extraction in Kent

HSE defines LEV Testing as a thorough examination to make sure that your fume extraction in Kent can continue to perform as intended by design and will contribute to the adequate control of exposure.

We follow a systematic procedure when performing LEV Tests and will:

• Check your filters to see what condition they are in.
• Measure the rotational speed of the motor with a tachometer.
• Take velocity pressure and static pressure of all test points on the system and face velocities at open hoods.
• Record the pressure drops across the filters.
• Measure ambient dust level.
• Measure contaminant in the returned air to the workshop.
• Measure the decibel readings between 2-3 meters of each machine.
• Measure the dust level reading in the breathing zone of employees.
• Carry out a smoke test.
• Complete a face velocity test.
• Provide you with an LEV report that complies with the legal requirements.

Following your LEV test, we can assist in the design, alteration and improvement of all systems for fume extraction in Kent if needed. Any required or possible improvements will be listed in order of priority, under: Report Findings & Prioritised Action Plan.